First-timer's Step-by-step Guide to Installing a New Shower Unit

First-timer's Step-by-step Guide to Installing a New Shower Unit

Blog Article

Call Today

Are you currently looking for suggestions concerning How to Build a Shower Enclosure for Your DIY Bathroom?

An effective shower installment calls for careful preparation as well as a great deal of work. For the most part, you will certainly require to do 3 types of tasks: framing wall surfaces, mounting the plumbing, and ending up wall surfaces.

Prep work

First of all, you have to pick the sort of shower that you wish to set up. It is necessary to ascertain whether the selected shower can coping with certain systems and can control a secure degree of water through the boiler. Most shower systems nowadays are developed to be flexible to various water pressures (such as stored warm water as well as cool mains).
It is additionally crucial to take into account the water pressure and also the planning of the piping and also water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The pipe and spray parts of the push-on mixer shower system can be linked to the bathroom faucet as per your requirement, and also the water temperature can be readjusted via the taps. Push-on mixers are cheap and also incredibly basic to install. Nevertheless, although the hose pipe link is simple, it is conveniently displaced. Furthermore, it is troublesome to adjust the temperature.

Bath/Shower Mixer: The pipe and spray of this type of shower are integrated with a bathroom mixer faucet, and also the temperature can be adjusted through the bath taps. It is a really cheap choice and also no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise deal with bothersome temperature control choices.

Guidebook Mixer: The hose pipe as well as spray of a hand-operated mixer shower unit belong of the wall surface device and also the hot and cold water products are connected to a single shutoff The temperature as well as pressure of the water are regulated through either one or a selection of handles (in much more expensive showers). Although temperature control is much easier in hand-operated mixer types, they are more pricey than the formerly mentioned mixers. They also require additional plumbing of cold and hot water system pipelines.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall surface device and also the cold and hot water products are connected to a single valve here too. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. One of the largest advantages of a thermostatic mixer shower kind includes practical temperature control. Nevertheless, it is one of the most expensive of the various mixer options.

Power Shower: A power shower is a solitary unit including a powerful electric pump that is capable of altering both the water pressure and temperature level. This type of shower can be fitted if there is supply of water from a cold water tank as well as a warm water cylinder. A power shower makes the adjustment of both pressure as well as temperature easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a mix boiler under keys pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply as well as it heats the water electrically. It is necessary to note that for this shower kind to be mounted, the keys stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also stress to be changed by means of a knob. Models with temperature level stabilisers are better as they stay unaffected by other taps somewhere else in operation within the home. A major downside of electric showers is that the control handle only enables the choice of high temperatures at less pressure, or lower temperature levels at a higher pressure. This is troublesome in the winter season when the spray is frequently weak and also the mains water is chillier. Nevertheless, this trouble is taken on in some versions which are offered with a winter/summer setting.

Technique

Relying on the kind of shower you wish to mount, the shower head should either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Before starting, it is suggested to note the settings of the shower head as well as control, and to prepare the pipe-work involved. In addition, the drain system to remove the drainage will need to be prepared. Both placements of the cable television path and the shower button will certainly likewise require to be taken into consideration if a rapid or electric shower device is being mounted.
Make use of the guideline overview given with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is necessary to remove the water system. In order to shield the pipelines, they ought to be given a water-proof covering and additionally fitted with separating shutoffs. The pipelines can then be hidden into the wall and also smudged over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Link the main shower control to the pipes that will be supplying the water (This might require a female screw string adapter).
Reconnect the water as well as test the pipelines for any leaks, as some might require tightening up.
If you are mounting an electric shower, keep in mind to switch off the electrical energy supply prior to making any electric connections. When these links have been made (there must be guidance within the user's manual), the power supply can be switched back on.

Readjusting Water Pressure to Match Your Shower

The cold water tank can be lifted to a higher elevation (often as little as 150mm (6inches)) by fitting a solid wooden assistance below it - perhaps composed of struts and also blockboards. If you select this alternative, the major and circulation pipelines will likewise need to be raised to meet the brand-new height of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be connected into the power supply in order to run.

Piping and Water drainage

It is best to make use of 15mm diameter supply pipelines, and also make the runs to the shower as brief and straight as possible so as to keep maximum stress and reduce warmth loss. Additionally, by minimising making use of elbow joints for pipe edges, you can decrease the resistance in the circulation of the supply of water. You can accomplish this by flexing the pipelines instead.

Many Typical Blunders

Breaching or disregarding regional code restrictions.

Utilizing pipes that are as well little.

Connecting copper to galvanized without making use of a brass or dielectric suitable between both.

Not making use of tape or pipeline compound at threaded joints.

Uneven your components when installing them.

Not setting up an air space filling up for components.

Cutting supply stub outs as well short to install the shutoff valves onto after the finished wall is in place.

Not correctly aligning tubing into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly trigger a leak.).

When turning the water back on in your house, always run the outdoors tube shutoff or flush your toilets to hemorrhage dirt and air from the lines. This debris can trigger problems in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like reading up on How to Build a Shower Enclosure for Your DIY Bathroom? Give feedback directly below. We would be glad to hear your opinions about this review. In hopes that you come back again before long. Sharing is good. Who knows, you may be doing someone a favor. Thanks a lot for taking the time to read it.

Call Today

Report this page